全自動混凝土攪拌車隨著時間的推移會變得越來越重，我們都知道是里面的殘余混凝土凝結造成的，而要解決混凝土粘罐的情況，及時的多沖洗就顯得很重要了，所以掌握和了解混凝土加水方法和步驟就顯得很重要了。
The concrete tank truck will become heavier and heavier as time goes by. We all know that it is caused by the residual concrete condensation inside. To solve the problem of concrete sticking to the tank, it is very important to wash it in time, so it is very important to master and understand the methods and steps of concrete watering.
1、控制氣壓緊固接頭
1. Control air pressure fastening joint
罐體內應該打進多少的氣壓，這個在出廠的時候已經設定好，不需自己調節。如果遇上特殊情況非要調節，建議壓力控制在3.5Mpa左右，壓力太大容易爆管。另外，新車以及日常使用中，要對管路接口的地方隨時緊固，防止脫落。
How much air pressure should be injected into the tank? This has been set at the time of delivery and does not need to be adjusted by yourself. If it is necessary to adjust under special circumstances, it is recommended to control the pressure at about 3.5Mpa. Too high pressure is easy to burst the pipe. In addition, in the new car and daily use, the place of the pipeline interface should be fastened at any time to prevent it from falling off.
2、罐車加水流程
2. Water filling process of tank car
每種罐車加水處的布置都大同小異，一般都是水罐排氣——加滿水——關閉加水閥，在不用的情況下，好將撥桿的位置放在中間。
The arrangement of the water filling place of each tank car is very similar. Generally, the water tank is vented - filled with water - the water filling valve is closed, and the position of the paddle is placed in the middle when not in use.
3、冬季排盡管內余水
3. Drain the residual water in winter
在冬季每天收車之后應該排盡水罐內和水管中的水，并在水管打入壓縮空氣吹盡各個管路中殘留的水，防止因為結冰造成管路凍裂。
In winter, the water in the water tank and the water pipe should be drained after the vehicle is closed every day, and the compressed air should be injected into the water pipe to blow out the residual water in each pipeline to prevent the pipeline from freezing and cracking due to icing.
作為一家專注的混凝土攪拌車生產商我們建議您在使用混凝土攪拌車時保持一個好的使用習慣，及時沖洗和進行各種準備工作可減少混凝土攪拌車的故障發生。更多相關內容就來關注我們http://www.yexingrack.com吧！
As a dedicated concrete mixer manufacturer, we recommend that you maintain a good usage habit when using concrete mixer. Timely washing and various preparations can reduce the failure of concrete mixer. Follow us for more relevant content http://www.yexingrack.com Come on!
