小型混凝土攪拌車的操縱系統一般有兩種操縱方式：機械式操縱和整體軟軸操縱。接下來小編為您進行講解。

The control system of small concrete mixer generally has two kinds of control modes: mechanical control and integral flexible shaft control. Next, I will explain it to you.

機械式操縱系統由副車架后臺上機械操作和駕駛室軟軸聯合控制，它由操作手柄、旋轉體、轉軸-搖臂機構、連桿機構、推拉軟軸和油門軟軸組成。

The mechanical control system is jointly controlled by the mechanical operation on the background of the subframe and the flexible shaft in the cab. It is composed of an operating handle, a rotator, a rotary shaft rocker mechanism, a linkage mechanism, a push-pull flexible shaft and a throttle flexible shaft.

整體軟軸式操縱系統是通過副車架后臺上安裝的軟軸控制器，來控制攪拌筒正、反轉和油門，它由軟軸總成、U型卡、調節桿、輔助支座和推拉軸支座組成。

The integral flexible shaft control system controls the forward and reverse rotation of the mixing drum and the accelerator through the flexible shaft controller installed on the background of the subframe. It is composed of flexible shaft assembly, U-shaped clamp, adjusting rod, auxiliary support and push-pull shaft support.

后臺機械操作系統中設置了機械限位，控制油泵控制閥的行程大小，在機械操作的行程范圍內，操作是靠設置鋼珠與彈簧壓在定位孔上固定的，共分五個擋位：兩個攪拌擋、兩個卸料擋、一個空擋。

A mechanical limit is set in the backstage mechanical operation system to control the stroke of the oil pump control valve. Within the stroke range of mechanical operation, the operation is fixed on the positioning hole by setting steel balls and springs. There are five gears in total: two mixing gears, two unloading gears and one neutral gear.

在擋位間能無級控制攪拌筒的轉速。

The rotation speed of the mixing drum can be controlled steplessly between the gears.

操縱系統主要控制攪拌筒的旋轉方向及轉速。

The operating system mainly controls the rotation direction and speed of the mixing drum.

操縱系統能控制攪拌筒的五種工作狀態：

The control system can control five working states of the mixing drum:

進料：攪拌筒正轉，轉速為6～14r/min；

Feeding: the mixing drum rotates forward at a speed of 6-14r/min;

攪動：攪拌筒正轉，轉速為0～6r/min；

Agitation: the mixing cylinder rotates in a positive direction, with a rotating speed of 0~6r/min;

卸料：攪拌筒反轉，轉速為0～6r/min；

Unloading: the mixing drum reverses at a speed of 0~6r/min;

高速卸料：攪拌筒反轉，轉速為6～14r/min；

High speed unloading: the mixing drum reverses at a speed of 6-14r/min;

停止：攪拌筒靜止?fàn)顟B(tài)。

Stop: the mixing drum is still.

針對小型混凝土攪拌車的操縱系統介紹相關內容就到這里了，您對此有什么疑問，可以來我們網站http://www.yexingrack.com進行留言咨詢！

That's all for the introduction of the operating system of small concrete mixer. If you have any questions, please visit our website http://www.yexingrack.com Leave a message for consultation!