混凝土攪拌車發動機過熱，一般就是司機朋友們所說的走高溫，發動機走高溫是不好的，運氣不好可能使發動機壞掉。出現這種情況怎么辦？要怎樣解決？以下緊急措施希望可以幫助到大家。

The engine of the concrete mixer is overheated, which is generally what the driver friends call high temperature. It is bad for the engine to run at high temperature. Bad luck may cause the engine to break down. What should we do if this happens? How to solve it? The following emergency measures are expected to help you.

1、如果在普通公路上發動機出現了過熱，應該盡快地降低車速，把攪拌車駛到樹蔭下，或駛到相對比較涼快的地方，將混凝土攪拌車停下來。打開發動機罩蓋，讓發動機怠速運轉，等待發動機溫度逐漸恢復正常。

1. If the engine overheats on ordinary roads, reduce the speed as soon as possible, drive the mixer truck to the shade of trees or to a relatively cool place, and stop the concrete mixer truck. Open the engine cover, let the engine run at idle speed, and wait for the engine temperature to gradually return to normal.

在發動機水溫恢復正常之后，將發動機熄火。然后再等待一段時間，直到發動機的水溫充分地下降了之后，再檢查發動機的冷卻水量。這時發動機的冷卻水量大都嚴重不足。按著規定量把冷卻水補足之后，再檢查一下冷卻系統，確認沒有其他故障之后，可以起動發動機，繼續行駛。

After the engine water temperature returns to normal, stop the engine. Then wait for a period of time until the water temperature of the engine drops sufficiently, and then check the cooling water volume of the engine. At this time, the cooling water of the engine is mostly insufficient. After replenishing the cooling water according to the specified amount, check the cooling system again. After confirming that there are no other faults, start the engine and continue driving.

2、如果在高速公路上出現了發動機過熱，需要立刻把暖風全部打開并打開車窗。由于有暖風幫助冷卻水散熱，能使冷卻水溫大幅度地下降。

2. If the engine overheats on the highway, you need to turn on all the warm air and open the window immediately. Because there is warm air to help the cooling water dissipate heat, the cooling water temperature can drop significantly.

這樣可以持續開車，就近找到高速公路的出口，將攪拌車駛到一定的場所停下來。

In this way, you can continue driving, find the exit of the highway nearby, and drive the mixer truck to a certain place to stop.

接下來，只要按照上述的方法，使發動機的溫度降下來就行。注意，好不要把攪拌車停在路邊，以免影響交通或被撞車，把混凝土攪拌車停在的場所。更多相關內容就來我們網站http://www.yexingrack.com咨詢了解吧！

Next, just lower the temperature of the engine according to the above method. Pay attention not to park the concrete mixer at the roadside, so as not to affect the traffic or be hit. Come to our website for more relevant content http://www.yexingrack.com Ask about it!